OSD Menu
PIP/PBP
•
Scope
•
Status
•
Menu Operation
Press the POWER button to switch on the monitor, then press the MENU button, the OSD menu will show
on screen. Press the MENU button again to quit the OSD menu.
In OSD menu, press LEFT and RIGHT buttons or use the equivalent turn-pots to choose different menu
items: Picture, Image adjustments, Setup, PIP/PBP , and system status.
Press UP and DOWN buttons or use the equivalent turn-pots to enter or exit sub-menu. If sub-menu
items are marked by the drop-down sub-menu group with icon; turn it to open or close the drop-down
sub-menu group.
In sub-menu, press LEFT and RIGHT buttons or use the equivalent turn-pots to select the sub-menu item
operation.
© 03.14 TAMUZ Broadcast
Note: When the menu window is not enough to show all the sub menu items, it will show
up/down arrow for the rest items.
Layout
•
Main Window Source
•
Second Window Source
•
Swap
•
UMD
•
UMD ID
•
UMD Position
•
UMD Color
•
Waveform
•
Histogram
•
Vectorscope
•
Zebra
•
Pixel Measurement
•
False color
•
Focus Assist
•
H-Flip
•
Timecode Display
•
Timecode Mode
•
Source & Format
•
Fh
•
Fv
•
Color Temp
•
Image Size
•
Scan Mode
•
CTI
•
Screen Saver
•
Power Saving
•
Digital Broadcast Monitor
OSPREY G3 Series
Page - 25 -