Features; Osprey G3 Series - TAMUZ KVM 9050W Operation Manual

Features

Features

OSPREY G3 series

The OSPREY G3 series monitors offers following features:
• High resolution LCD panel - LED backlight and high resolution; The high-brightness, high contrast,
high-speed response and wide viewing angle technology help the monitor can be used under
variety of lighting conditions
• Durable and lightweight design; Full metal durable and lightweight design provides easy operation
for post-production and OB vans applications.
• Two Colors Tally Indicator; Two Colors Tally Indicator as red and green, to monitor each input
signal and check ON-AIR mode.
• Auto-detection of all color system (PAL, NTSC, SECAM); This unit automatically detects the color
standards
• 3D video decoder; Process 3D decoding on VIDEO signals, to realize better reduce cross color
• Motion-Adaptive De-interlacing; The de-interlace converts interlaced video to progressive video by
motion detection, reduce the serrated image.
• 10BIT data Processing; Signal input, signal processing and image output are 10bit data processing,
to ensure the details of the image display
• Y/C Input; Decomposition for the luminance signal (Y) and chrominance signals (C) of the video
signal can be input through this connector
• SDI Input; 3G/HD/SD-SDI video signal can be input through this connector
• YPbPr Input; HD/SD-YPbPr video signal(Compatible YCbCr) can be input through this
• DVI/HDMI/VGA Input; DVI/HDMI/VGA signals can be input through this connector. (HDMI via
HDMI-DVI connector, VGA via VGA-DVI connector)
• Signal Source Loop Through; Signal that linked to the input connector will be enlarged and linked to
output connector. SDI re-clocked loop through ensure the signal without enervation.
• PIP/PBP; SDI input signal can be displayed with another signal of VIDEO, S-VIDEO, COMPONENT,
HDMI simultaneously, and showing two pictures on the screen.
• SWAP Function; In PIP/PBP mode, two pictures can be swapped between each other
• Color Temperature Selection; Different color temperatures selection
• Image size Setting; The display mode is switchable between 16:9, 4:3, full screen, 1:1, and the
original image proportion
• Marker setting; Show frame borders, center mark, and safety area, etc.
• HV Delay; Display the blanking period of SDI input signal.
• Scan mode; Scan mode includes Full Scan, Over Scan and Under Scan. (KVM-2230W and KVM-
2430W are with Full Scan and Over Scan, without Under Scan)
• Zoom In (focus assist); Zoom in any part of the picture, to watch picture details more clearly, and
assist for focus.
• Audio level meter (UV+PPM); Show the audio level meter (UV+PPM) for SDI embedded audio
• Brightness histogram; System automatically analyzes the input signal's brightness distribution with a
diagram on the screen. X coordinate shows the brightness sampling value, the range is 0 ~ 1023,
the higher value means the higher brightness. Y coordinate shows the percentage of the brightness
in the entire frame picture.
• Vector scope; Vector UV analysis for color bar signal input
• Remote control function; Available to connect to the remote terminal to operate the equipment to
directly select the input signal, longitudinal mode settings etc
© 03.14 TAMUZ Broadcast
OSPREY G3 Series
Digital Broadcast Monitor
connector
Page - 16 -