Setup - TAMUZ KVM 9050W Operation Manual

OSD Menu
Menu Item
Scan Mode
DVI/ YUV Color
space
CTI
Gray mode
Blue Mode
Fast Mode
H/V Delay
Luma histogram
Chroma Vector

Setup

Menu Item
Language
OSD Settings
Transparency
OSD Timeout
H Position
V Position
© 03.14 TAMUZ Broadcast
Setting
100% Scan 100% Image display
Over Scan 5% 95% Image display
Under Scan 5% 105% image display (invalid for KVM-2230W and KVM-
2430W )
ON Select it when HDMI input signal is YUV color space.
Select it when HDMI input signal is RGB color space
OFF (For HDMI signal only)
ON Color Transient Improvement, for better color transition
OFF
ON Monochrome mode with black and white image
OFF
ON Display in Blue only
OFF
ON Interlaced scanning without converting into progressive
scan
OFF
ON Display the blanking period of SDI input signal
OFF
ON System automatically analyzes the input signal's bright-
ness distribution with a diagram on the screen. X axis
OFF
shows the brightness sampling value, the range is 0 ~
1023, the higher value means the higher brightness. Y
axis shows the percentage of the brightness in the entire
frame picture.
ON Vector analysis for color bar signal input. The vector sco-
pe has U and V values.
OFF
Setting
English Menu Language Display: English
0 to 100 Menu background from opaque to completely transpa-
rent selection
Menu disappear time when no button operation
4 > 30
Menu position horizontal adjust
0-100
Menu position vertical adjust
0-100
OSPREY G3 Series
Description
Description
Digital Broadcast Monitor Page - 27 -