Technical Specifications - HP Brocade 8Gb SAN Quickspecs

Hide thumbs Also See for Brocade 8Gb SAN:
Table of Contents

Advertisement

QuickSpecs

Technical Specifications

Fibre Channel ports
Fibre Channel ports
Fibre Channel ports
Fibre Channel ports
Device support and
Device support and
Device support and
Device support and
Scalability guidelines
Scalability guidelines
Scalability guidelines
Scalability guidelines
Performance
Performance
Performance
Performance
Certified maximum
Certified maximum
Certified maximum
Certified maximum
Switch core
Switch core
Switch core
Switch core
Fabric latency
Fabric latency
Fabric latency
Fabric latency
Maximum frame size
Maximum frame size
Maximum frame size
Maximum frame size
Classes of service
Classes of service
Classes of service
Classes of service
Port types
Port types
Port types
Port types
Data traffic types
Data traffic types
Data traffic types
Data traffic types
Media types
Media types
Media types
Media types
Laser
Laser
Laser
Laser
Fabric services
Fabric services
Fabric services
Fabric services
Options
Options
Options
Options
Supported software
Supported software
Supported software
Supported software
Management access
Management access
Management access
Management access
Diagnostics
Diagnostics
Diagnostics
Diagnostics
Dimensions
Dimensions
Dimensions
Dimensions
Environment
Environment
Environment
Environment
Brocade 8/12c SAN Switch model:
12 - 8 Gb ports in any internal/external port combination (ships with two 8 Gb short wave SFP+s)
Brocade 8/24c SAN Switch models:
16 internal 8 Gb ports and 8 external 8 Gb auto-sensing ports (ships with four 8 Gb short wave SFP+s)
http://h18006.www1.hp.com/products/storageworks/san/documentation.html
8 Gb/sec line speed, full duplex
Certified maximum information available at:
http://h18006.www1.hp.com/products/storageworks/san/documentation.html
Non-blocking
700 nSec. Latency increases as input port speed is lower than the output port speed.
2112-byte payload
Class 2, Class 3, Class F (inter-switch frames)
FL_Port, F_Port, and E_Port; self-discovery based on switch type (U_Port)
Fabric switches supporting unicast and broadcast
Small Form-Factor Pluggable (SFP) Transceiver. 2/4/8 Gb short wave up to 500 m (1,640 ft.) and
2/4/8 Gb long wave* up to 35 km
Short-wave and long-wave laser transceivers (SFP's) are supported
Simple Name Server, Registered State Change Notification (RSCN). Includes Advanced WebTools
Enhanced group Management and Advanced Zoning. Optional fabric services include: Adaptive
Networking, Fabric Watch, ISL Trunking, Advanced Performance Monitoring, and Extended Fabrics.
SFP media, port upgradeable licensing, advanced management software licensing
Telnet, SNMP (FE MIB, FC Management MIB), HP Systems Insight Manager, HP Storage Essentials, HP
Onboard Administrator for BladeSystem, Advanced WebTools, Enhanced Group Management, ,
Advanced Zoning, Data Center Fabric Manager, Fabric Watch, and Advanced Performance Monitoring
WebTools, SMI-s provider, SNMP, Telnet, and Secure Telnet
POST and embedded online/offline diagnostics
Depth
Height
Width
Weight
System Inlet Temperature Operating
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
DA - 13084
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
11.00 in. (with handle protrusion)
1.13 in.
7.63 in.
Approx. 2.91 lb - without media
Non-operating
Operating
Non-operating
Worldwide — Version 4 — May 1, 2009
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305m (1.8°F
per every 1000ft) above sea level to a maximum
of 3050m (10,000ft), no direct sustained
sunlight. Maximum rate of change is 10°C/Hr
(18°F/Hr ). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/Hr (36°F/Hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
Page 15

Advertisement

Table of Contents
loading

Table of Contents