Adhesive Conductive Main Fpc - Sony Xperia C3 Dual Working Instructions

Replacement

4.12 Adhesive Conductive Main FPC

Follow the 3.1 – 3.9 Disassembly instructions!
Follow the 4.26 and 4.35 Removal instructions!
Prepare a new Adhesive Conductive Main FPC.
Follow the 4.35 and 4.26 Installation instructions!
Follow the 5.1 – 5.9 Reassembly instructions!
Adhesive Conductive Main FPC must be replaced when
the Main FPC Assy is disassembled.
REMOVAL
Detach the Adhesive Conductive Main FPC and remove it
with a pair of Plastic Tweezers.
Scrap! Not to be reused!
Make sure all remaining adhesive residue have been
removed!
INSTALLATION
Attach a new Adhesive Conductive Main FPC by using a pair
of Plastic Tweezers as shown in picture and press it.
Note the position of 3 alignment holes!
1290-1182 Rev 4
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
25(72)