Set Supply Type
Select Supply Type
1. Paper Label/Tag
2. Fax Paper
3. Synthetic Label
Suppress Warnings
Suppress Warnings:
Disabled
Change? Y/N:
L
F o r m a t H e a d e r O p t i o n s
Format Header Options allow operators to select the format label they want
to print and allow you to edit a format you have created. When you see:
Format Header Optns
1. Generate MPCL Num
2. Generate Fmt Name
3. Skip Desc. Prompt
NOTE: Generate MPCL Num and Skip Desc. Prompt are for future use.
Select the type of supplies (1-3) you are using.
The General Options Menu appears. Default:
Paper Label/Tag.
Specify whether to display warning messages.
Default: Disabled.
Press Y to enable or disable the option. Then,
press e to return to the General Options
Menu.
Setting
Description
Enabled
Warning messages will not appear on
the display.
Disabled
Warnings messages will appear on
the display. This value is the default.
Press N to cancel and return to the General
Options Menu.
See Chapter 4, "Designing a Format," to learn
about a case where you might want to suppress
warnings.
Press 2 to select Generate Fmt Name.
Configuring the Printer 3-5