Starting The Design Process - Paxar Monarch DOS-based Pathfinder Ultra System 6035 User Manual

S t a r t i n g t h e D e s i g n P r o c e s s
Turn on the printer. You will see the Main Menu.
- = Main Menu = -
1. Design Formats
2. Print Labels
3. Configuration
- = Design Menu = -
1. Create New Format
2. Edit Old Format
3. Copy Format
4. Delete Format
Enter Format Name
> _ _ _ _ _ _ _ _ _ _ _ _ _
L
Enter Length of
supply (55 – 400)
(eg. 400 = 4 inches)
> _ _ _
Select Supply Width
1. 1.20 Inches
2. 1.50 Inches
3. 2.00 Inches
Select Type: Fld #1
1. Text Field
2. Bar Code Field
3. Constant Text
4. Line
5. Finished
Save current
format? Y/N > _
4-6 Designing a Format
From the Main Menu, press 1 to design
1.
your formats.
Press 1 to create a new format.
2.
3. Type UPCA for the format name. Press
e.
Type 200. Press e.
4.
Press 3 for your supply width.
5.
6. Select a field type (1-5) for field 1.
To define text fields, see Chapter 5, "Defining
Text Fields."
To define bar code fields, see Chapter 6,
"Defining Bar Code Fields."
To define constant text fields, see Chapter 7,
"Defining Constant Text Fields."
To define line fields, see Chapter 8, "Defining
Line Fields."
Select 5 when finished designing your
format (after all fields are defined).
7. Press Y to save the format or press N to exit
without saving the format. You return to the
Design Menu.