Batch Errors (100 - 199); Option Errors (200 - 249) - Paxar Monarch DOS-based Pathfinder Ultra System 6035 User Manual

Bar code density is invalid. See Chapter 6, "Defining Bar Code
033
Fields," for the bar code density values.
040 Line thickness must be 1 to 10.
041 Line angle must be 0, 90, 180, or 270.
042 End row is invalid. Line segment end row is defined outside of
printable area. See Chapter 8, "Defining Line Fields," for more
information.
043 End column is invalid. Line segment end column is defined outside
of printable area. See Chapter 8, "Defining Line Fields," for more
information.
044 Dot pattern for line or box must be "".
045 Line length is defined beyond the maximum length of 3.72". See
Chapter 8, "Defining Line Fields," for valid lengths.
046 Line type must be S (segment) or V (vector).
051 Imaging mode in the graphic header must be 0.

Batch Errors (100 - 199)

101 The format referenced by batch is not in memory.
102 Print quantity is outside the range 0 to 25.
104 Batch mode must be N (new) or U (update).
105 Batch separator in a batch control field must be 0 (Off).
106 Print multiple is not 1.
108 Multiple part supply is outside the range 1 to 5.

Option Errors (200 - 249)

200 Option number must be 1, 4, 31, or 50.
201 Copy length is outside the range 0 to 255.
Troubleshooting 12-5