2. Press Enter. You see
PRINTER MENU
SUPPLY TYPE
3. Press or
S e t t i n g t h e S u p p l y T y p e
The printer has a black mark/die cut sensor, which it uses to properly
calibrate supplies. Black mark supply has sense marks (black marks) on
the back of them. Die cut supply does not have any black marks.
1. From the Printer Setup menu, press or
SUPPLY TYPE
2. Press Enter. You see
PRINTER SUPPLY MENU
BLACK MARK
3. Press or
Enter. The current setting is displayed on the right. The default is
Black Mark.
4. Press or
RETURN TO PRINTER MENU
5. Press Enter.
2-2 User Manual
to move through the Printer Setup menu.
BM
to select the supply type you are using, then press
until you see
until you see