Paxar Monarch 9412 Reference Manual page 63

C4. gap Number of dots between characters. Range: 0-99.
Any number other than 0 or the default number affects your
field width. Default spacing:
Standard
Reduced
Bold
OCRA-like
CG Triumvirate Bold
CG Triumvirate
C5. font Style of font. Options:
1
2
3
4
or a valid downloaded font selector number.
C6. hgt mag Height magnifier, 1-7 (times). Use a magnifier of 1 with
proportionally spaced fonts, because characters lose
smoothness at higher magnifications.
C7. wid mag Width magnifier, 1-7 (times) Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field.
C8. color Options for standard printer fonts:
B
D
O
R
W
There are two types of field color overlay attributes:
Transparent
Opaque
Field placement in the packet is an important consideration
when using field color attributes, because fields are imaged in
the order they are received. If a line field is defined before
the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field's color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field's color attribute.
3 dots
1 dot
3 dots
3 dots
varies with each letter
varies with each letter
Standard 10
Reduced 11
Bold
OCRA-like
Opaque, Normal, Black, Normal
Opaque, Normal, White, Normal
Transparent, Normal, Black, Normal
Opaque, Normal, White, Normal
Opaque, Normal, White, Normal
The overlay field (text or constant text) does
not block out (or "erase") existing fields.
The overlay field blocks out (or "erases")
existing fields.
CG Triumvirate Bold
CG Triumvirate
Defining Fields 4-15