Table of Contents
Advertisement
Example
Adds a configuration to non-volatile RAM and specifies English
units. It also uses the default contrast, moves print 0.25 inches
closer to the bottom of the supply and does not change the
margin adjustment, prints at the default print speed, and uses the
default printhead width.
If you do not use the optional parameters, the syntax for the
online configuration packets does not change. For example,
uses the default contrast, moves print 50 dots (025 inches) closer
to the bottom of the supply and does not change the margin
adjustment, prints at the default print speed, and uses the default
printhead width.
Example
Uploads the printer configuration from non-volatile RAM and
returns the following to the host.
A,0,0,0,0
B,1,0,0,0,0,0
C,0,0,0,0,0
D,1,0,2
E,"~123~044~034~124~125~126","~013~010",""
F,3,1,0,0,1
M,R,0,0,N,2424,0
M,R,N,20
M,T,N,10
M,I,N,1259
M,D,N,975
M,F,N,160
M,V,N,0
{I,0,A,N,E
C,0,25,0,0,0
{I,C,0,50,0,0,0
{I,0,U,N
}
}
}
}
Configuring the Printer 3-7
Advertisement
Table of Contents
