Table of Contents
Advertisement
A+ Server 1012A-MTF User's Manual
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside the
VGA port. Additionally, there is a dedicated
LAN for IPMI on top of the two rear USB
ports. These Ethernet ports accept RJ45
type cables.
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB 2.0)
are located beside the Keyboard and Mouse
PS2 ports (USB0/1). One additional Type A
port (USB6) is included on the motherboard.
See the table on the right for pin definitions.
USB Headers
Four USB 2.0 headers (USB2/3 and USB4/5)
are also included on the motherboard. These
may be connected to provide front side ac-
cess. A USB cable (not included) is needed
for the connection. See the table on the right
for pin definitions.
Video Connector
A Video (VGA) connector is located below
the COM Port on the IO backplane. This
connector is used to provide video and CRT
display.
LAN Ports (LAN1/2)
Pin# Definition
1
P2V5SB
2
TD0+
3
TD0-
4
TD1+
5
TD1-
6
TD2+
7
TD2-
8
TD3+
9
TD3-
NC indicates no connection.
Universal Serial Bus Ports
Pin Definitions (USB 0/1,
USB0/1
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
Universal Serial Bus Headers
(USB2/3, USB4/5)
Pin # Definition
1
+5V
3
PO-
5
PO+
7
Ground
9
Key
Note: NC indicates no connection.
5-14
Pin Definition
Pin# Definition
10
SGND
11
Act LED
12
P3V3SB
13
Link 100 LED
(Yellow, +3V3SB)
14
Link 1000 LED
(Yellow, +3V3SB)
15
Ground
16
Ground
17
Ground
18
Ground
USB6)
USB6
Pin # Definition
1
+5V
2
PO-
3
PO+
4
Ground
Pin Definitions
JUSB4, JUSB5
Pin # Definition
2
+5V
4
PO-
6
PO+
8
Ground
10
NC
Advertisement
Table of Contents
