Too Long Filling Time; Too Long Heating Time - Primus F 22-55 Installation And Maintenance Instructions Manual

Front view: machine 22 kg / 50 lbs

6.2. TOO LONG FILLING TIME

Low water pressure:
-more machines have been filling up in the same time.
The inlet valve filter clogged:
WARNING !
!
STOP THE HOT WATER INLET TO THE MACHINE AND WAIT FOR COMPONENTS TO COOL DOWN!
shut the main water inlet, take off the inlet valve filters, clean and put them back.
A damaged hose:
-replace the hose or its gasket.
Defective inlet valve:
-change the valve.
Water escaping:
-check the inlet pipeline, hoses, valves, filters, tapes, clamps, their connections and eliminate possible
leakage.

6.3. TOO LONG HEATING TIME

Electrical heating elements clogged or defective:
- exchange heating elements for new ones.
Insufficient steam supply:
- to many steam-heated machines connected.
- leakage of the steam system.
- too high level of condensation in the steam system.
Clogged steam filter or hot (cold) water filter:
WARNING !
!
STOP THE HOT WATER INLET TO THE MACHINE AND WAIT FOR COMPONENTS TO COOL DOWN!
-dismantle the sieve (fig.5.9, pos.2) from the filter body (1), clean the sieve and put it back with the gasket (3).
Defective steam or hot water valve:
-exchange the valve
34
Top view: machines 33/40/55 kg - 80/100/125 lbs
Fig.6.1
INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE 03/02 504 766