Lubrication - Primus F 22-55 Installation And Maintenance Instructions Manual

MARKING OF THE BOLTS
A Bolts of hub flange
B Bolts fixing the rear wall of external drum to the inner drum covering over a tyre
C Bolts fixing the plate of motors to the outer face
D Bolts fixing the external drum to the front face
E Bolts fixing the support and damper holders to the rear wall of outer drum
F Bolts fixing the plate of motors to the damper holders
G Housing fixing the drum pulley to the shaft
Tightening Moments values of bolts and nuts for 33/40/55 kg 80/100/125 lbs machines (fig. 5.7. B)
Bolt
Dimension
(nut)
A
M20 x 65
B M12 x 30
33 kg TYPE: nut KM13
C M12 x 35
D
M30 x 80
E M12 x 38
MARKING OF THE BOLTS
A Bolts of hub flange
B Bolts fixing the pulley to the nut of fixing housing
C Bolts fixing the motors plate to the external drum
D Bolts fixing the inner drum to the shaft
E Bolts fixing the door brackets
A spanner for the jam nut KM 13 is not a part of the delivery or accessories.

5.8. LUBRICATION

WARNING !
!
DO THE LUBRICATION WORK ONLY WHEN THE MAIN SWITCH IS OFF AND ALL COMPONENTS
HAVE BEEN STOPPED!
(IF NOT STATED OTHERWISE IN FOLLOWING INSTRUCTION).
504 766 PUBLICATION DATE 03/02
Number of pcs.
24 (12)
8
1
6
1
4
Tab.5.7.B
Fig. 5.7. B Machines 33/40/55 kg 80/100/125 lbs
INSTALLATION AND MAINTENANCE MANUAL
Tightening
Moments (Nm)
600,00
70,00 52,00
450,00 332,00
70,00 52,00
800,00 590,00
25,00 18,50
Tightening
Moments (lbf.ft)
443,00
27