Skip Index; Knife Control; Error Action - Paxar Monarch 9855 Operator's Handbook Manual

3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main menu.
K n i f e C o n t r o l
This function is not available with RFID.
E r r o r A c t i o n
You can change how the printer responds to a bad label. The
choices include normal and overstrike/continue one to five
consecutive bad labels. The overstrike pattern is created to
prevent someone from using the label.
Selecting overstrike and continue 1x-5x sets the number of times
the printer prints an overstrike pattern on consecutively bad
labels before generating an error. Operator intervention is
required to clear the error.
For example, consider this scenario when the error action is set to
overstrike/continue 3x:
If the printer errors on the first label, an overstrike pattern is
printed, but the printer attempts to reprint the image from the bad
label on the next label. If the second label generates an error, an
overstrike pattern is printed, but as before, the printer attempts to
reprint the image from the bad label. If the third consecutive label
also generates an error, likewise, an overstrike pattern is printed,
the printer stops and the error message is displayed. The
operator must resolve the error condition before printing
continues.
All manuals and user guides at all-guides.com

SKIP INDEX

No
r
Setting Supply Options 4-15