Parameters Display - Baxi LUNA 3 COMFORT MAX Installers And Users Instructions

table of burner pressures
Gas used
injector diameter (mm)
Burner pressure (mbar*)
reDuceD heat output
Burner pressure (mbar*)
noMinal heat output
no. of injectors
* 1 mbar = 10,197 mm H O
2
table 1
Gas consumption at 15 °c - 1013 mbar
Nominal heat output
Reduced heat output
p.c.i. 34,02 MJ/m
table 2
19.1 information and advanced setting mode
To access the Information and Advanced Setting mode, it is necessary to press, for at least 3 seconds, the ip button; in
INFO mode the display shows "inFo".
To escape the INFO mode briefly press the ip button. In this mode press the oK button to scroll the windows; to set
parameters press the +/-
WarninG
Communications between the main board and the remote control is not immediately. In some case it may hap-
pen that the command given through the remote control takes some time depending on the type of the tran-
sferred information.
central heatinG (ch)
"ch sl" Max­. heating circuit setpoint, value settable with the buttons +/-
•
WarninG: to change the unit of measure from °C to °F and vice versa, press the
"eXt°c"
• Outside temperature (with ex­ternal sensor connected).
"ch o>"
• Max­imum Heating flow temperature.
"ch r<"
• Return heating temperature (unplanned).
"ch s^"
• CH temperature setpoint.
• "ch MX" Max­imum CH temperature setpoint (max­. settable value).
• "ch Mn" Minimum CH temperature setpoint (min. settable value).
DoMestic hot Water (D.h.W.)
• "hW o>" D.H.W. flow temperature.
• "hW s^ " Max­imum setpoint temperature value setting. Press the +/-
• "hW MX" Max­imum D.H.W. temperature setpoint (max­. settable value).
• "hW Mn" Minimum D.H.W. temperature setpoint (min. settable value).
instructions pertaininG to the installer
250 Fi
G20 G31
1,18 0,74
1,9 4,9
11,3 29,4
250 Fi
G20 G31
2,84 m 3 /h 2,09 kg/h
1,12 m /h 0,82 kg/h
3
3 46,3 MJ/kg

19. parameters display

button.
240 i
G20 G31
1,18 0,74
1,9 4,7
10,0 26,0
15
240 i
G20 G31
2,78 m 3 /h 2,04 kg/h
1,12 m /h 0,82 kg/h
3
34,02 MJ/m 3 46,3 MJ/kg
buttons to set the value.
63
310 Fi
G20 G31
1,28 0,77
1,8 4,9
13,0 35,5
310 Fi
G20 G31
3,52 m 3 /h 2,59 kg/h
1,26 m /h 0,92 kg/h
3
34,02 MJ/m 3 46,3 MJ/kg
.
button.
925.480.1 - GB