Download Print this page

AEG GYB 00816UT Installation And User Manual page 31

Storage water heater

Advertisement

• Children must be supervised to
ensure that they do not play with the
appliance.
• The appliance contains hot parts.
Ensure that children do not have
access to the appliance and lock
possible access doors.
• Keep all packaging away from
children.
2.3 Installation
• Only qualified, certified personnel
may install the appliance.
• Always remove all the packaging
before installing the appliance.
• Do not install or use a damaged
appliance.
• Do not install or use the appliance in
a place where the temperature is less
than 0 °C.
• The appliance is suitable for indoor
use only.
• Do not install the installation at an
altitude of more than 2000 metres
above sea level.
• Risk of scalding! An unstable work
environment and air pressure
differences may cause uncontrolled
splashing of the boiling water or
developing of steam. The appliance
should not be installed in vehicles
like boats or airplanes.
• Do not install the appliance in
locations with the presence of a
corrosive or explosive atmosphere.
• Only install the appliance according
to the instructions as described in
this manual. Do not use extension
hoses other than provided with the
appliance.
• The appliance may only be used
together with the original AEG tap.
• Make sure to place all parts correctly
and according to the instructions.
Failure to do so may affect the
proper functioning of the product.
• Unauthorized alterations to the
appliance and technical
modifications are not permitted.
2.4 Water connection
• Install a pressure reducing valve if
the water pressure of the water
supply exceeds the maximum
allowed water pressure of the
pressure safety valve. Refer to the
section TECHNICAL INFORMATION
for the maximum allowed water
pressure of the pressure safety valve.
• Improper installation of the appliance
can cause property damage.
Observe the national installation
regulations (e.g. EN 1717:2000),
general hygiene conditions and
technical data for the protection of
the drinking water.
2.5 Electrical connection
WaRNINg! Risk of fire and
electrocution!
• The appliance must be connected to
a permanent and earthed AC wall
socket (with 16A fuse).
• Electrical installation work must only
be performed by a qualified
electrician. This work must be carried
out in accordance with all national
and local regulations.
• Extension cables and multi-plug
adapters are not permitted between
the earthed AC wall socket and the
plug of the boiler.
• Make sure the plug of the boiler and
the power cable are not damaged.
Contact the manufacturer or an
electrician if parts are damaged.
• Connect the plug of the boiler to the
earthed AC wall socket only at the
end of the installation. Make sure
that there is access to the plug and
earthed AC wall socket after the
installation. See the chapter
"Installation".
ENGLISH
29

Advertisement

loading

This manual is also suitable for:

Gyb 00416ut