Dodge ram truck 3500 1996 Service Manual page 1691

BR
AUTOMATIC TRANSMISSION—46/47RE 21 - 3 1 1
DISASSEMBLY AND ASSEMBLY
(Continued)
BE SURE
TO ALIGN
BORES
TRANSFER
- PLATE
LOWER
HOUSING
(OVERDRIVE)
SEPARATOR
PLATE
J9321-441
Fig. 98 Lower Housing Separator Piate
(4) Install lower housing on assembled transfer
plate and upper housing (Fig. 99).
(5) Install and start valve body screws by hand.
Then tighten screws evenly to 4 N-m (35 in. lbs.)
torque. Start at center and work out to sides when
tightening screws (Fig. 99).
UPPER HOUSING W A L W E AND PLUG INSTALLATION
Refer to (Fig. 100), (Fig. 101) and (Fig. 102) to per­
form the following steps.
VALVE
BODY
SCREWS (13)
LOWER
HOUSING
UPPER
HOUSING
TRANSFER
PLATE J9321-442
Fig. 99 instaliing Lower Housing On Transfer Plate
And Upper Housing
(1) Lubricate valves, plugs, springs with clean
transmission fluid.
(2) Assemble regulator valve line pressure plug,
sleeve, throttle plug and spring. Insert assembly in
upper housing and install cover plate. Tighten cover
plate screws to 4 N-m (35 in. lbs.) torque.
(3) Install 1-2 and 2-3 shift valves and springs.
(4) Install 1-2 shift control valve and spring.
(5) Install shift valve cover plate.
Fig. 100 Shuttle And Boost Vaive Components