Operating Data; Hygiene Logbook - Miele PG 8164 Operating Instructions Manual

12.3 Operating data

Here you can read out all operating data.
Retrieving the operating data
 Press the button.
The following operating data is shown on the display.
Commissioning
1
Next service in
Total operation hours
Total washing cycles
Total water consumption
Op. hours/day
Washing cycles/day
Water consump./day
Remaining water softening capacity
Operating hours Master old
INFO The display depends on the equipment of the machine.
 Press the back button to exit from the menu.

12.4 Hygiene logbook

In the hygiene logbook you can:
 retrieve all operating conditions, actions, and failures for one day in chronological order.
 retrieve all hygiene relevant data.
The list starts with the current date and the first event on this day. Then the following events on that day, and
then the events of days before. The most important operating data are summarized at the end of each day.
INFO When the memory capacity is reached, the oldest data is deleted as soon as new data is added.
Accessing the hygiene logbook
 Press the button.
 The hygiene logbook display then appears:

The list starts with the current date and the first event on this day.

This is followed by the events from the days before.
 Press the back button to exit from the menu.
1
An authorised service technician can activate this function.
2
when a new display is installed
Date
x hours or washing cycles
x hours
x
x litres
x hours
x
x litres
x litres
2
x hours
PIN menu
GB
57