Safety Functions; Operation; Before Use; Installing The Handle - AEG LW 60.0 Instructions For Use Manual

Safety functions

the charger features the following safety features to prevent damage to the charger
and the battery or the vehicle:
▪
Short circuit (defective battery),
▪
incorrect connection (connected with reversed polarity),
▪
sparking
▪
overheating
▪
excess current
▪
overcharging

OPeratION

Before use

Caution!
risk of injury whilst unpacking due to e.g. pinching or falling pieces. remove the
charger from the packing with two people and watch for moving and loose parts.

Installing the handle

Note: You will need a cross-tip screwdriver for assembly.
1. remove the screws on the handle (9) for transport.
2. Flip the handle up and secure the handle with three screws at each side.
Warning!
Before using this device be sure to read the operating manual for the battery and
the vehicle and understand all safety notices.
▪
Use safety goggles and acid-proof safety gloves.
▪
ensure adequate ventilation.
▪
ensure the battery poles are clean. If the battery has removable vent caps, fill
each battery cell with distilled water to the level recommended by the battery
manufacturer. Do not overfill the cells.
GB
33