HP ProCurve Switch 5406zl Installation And Getting Started Manual page 38

N o t e
4. Check the images repository to verify that the updated CF Service OS was
downloaded to the Services Module:
hostswitch(services-module-C:HD)# show images
5. Uninstall the previous version of the CF Service OS.
hostswitch(services-module-C:HD)# uninstall cf_service
6. Install the updated CF Service OS.
hostswitch(services-module-C:HD)# install cf_service <CF image>
(Note: Tab completion may be used for the CF image name.)
7. Boot the CF Service OS.
hostswitch(services-module-C:HD)# boot cf_service
Changing boot from Service OS to CF Service OS.
System will be rebooted. Do you want to continue [y/n]? y
Rebooting
8. Check the version of the updated CF Service OS and confirm it is running:
hostswitch(services-module-C:CF)# show version
As long as the Services Module is booted into the CF Services OS, no CF
Service OS updates are permitted; only Service OS updates are allowed from
here. The reverse is true as well; when the Services Module is booted into the
Service OS, only CF Service OS updates are allowed.
9. Since the boot changed from the Service OS to the CF Service OS, the
Services Module no longer has an IP address. Get an IP address (the "ip
address" and "ip default-gateway" commands also can be used to manu-
ally set an IP).
hostswitch(services-module-C:CF)# ip dhcp
10. Download the Service OS update.
hostswitch(services-module-C:CF)# download ftp IP-ADDR IMAGE [user
USER]
Software Components
Updating the Service OS
D-3