Table of Contents
Advertisement
7. Make sure that the teeth on the Fan Grill
(102) are on the outside of the Upright Cover
(80) and sit inside the grooves on the Upright
Cover.
Tighten two #6 x 5/8" Machine Screws (114) into
the Upright Cover (80) in the locations shown.
Be careful not to overtighten the Machine
Screws.
8. Tighten the two 3/8" x 3 1/4" Patch Bolts (1).
9. Remove the packaging from the Handrail Cover
(86).
Attach the Handrail Cover (86) to the handrail
assembly with six #8 x 2 1/4" Machine Screws
(3). Start all six Machine Screws but do not
tighten them yet. Start the indicated Machine
Screws first.
7
114
102
8
9
First
3
11
114
Teeth
80
1
86
First
3
Handrail
Assembly
Advertisement
Table of Contents
