1. Manuals
  2. Brands
  3. NordicTrack Manuals
  4. Treadmill
  5. NTL09806.1
  6. User manual

NordicTrack NTL09806.1 User Manual

C2400
Hide thumbs Also See for NTL09806.1:

Advertisement

Table of Contents

Model No. NTL09806.1
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–5 p.m. MST
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!

Advertisement

Table of Contents
loading

Related Manuals for NordicTrack NTL09806.1

Summary of Contents for NordicTrack NTL09806.1

  • Page 1 Model No. NTL09806.1 Serial No. USER'S MANUAL Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.

  • Page 2: Table Of Contents

    LIMITED WARRANTY ............. . .Back Cover NordicTrack is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    11. To purchase a surge suppressor, see must be able to safely lift 45 pounds (20 kg) to your local NordicTrack dealer or call the toll- raise, lower, or move the treadmill. free telephone number on the front cover of this manual and order part number 146148, or 21.
  • Page 4 22. When folding or moving the treadmill, make the treadmill, and before performing the main- sure that the storage latch is fully closed. tenance and adjustment procedures de- scribed in this manual. Never remove the 23. Always remove iFIT cards from the iFIT slot motor hood unless instructed to do so by an when you are not using them.

  • Page 5: Before You Begin

    The home more enjoyable and effective. And when you’re model number of the treadmill is NTL09806.1. The ser- not exercising, the unique C2400 treadmill can be ial number can be found on a decal attached to the...

  • Page 6: Assembly

    Washer (9 3/4” Tek Screw (58)–4 ASSEMBLY 1/2” Silver Screw (48)–1 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not 23)–2 dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
  • Page 7 2. Attach two Base Pads (81) to the base of the Uprights (85) in the indicated locations with two 1" Tek Screws (82). Note: One replacement Base Pad may be included. Use the Base Pad to re- place any Base Pad that becomes worn. 3.
  • Page 8 5. Identify the Latch Assembly (76). Make sure that the sleeve has been slid over hole 1 and that the Latch Knob (46) is locked into hole 1. Pull on the sleeve to make sure it is locked into place. Hole 2 Next, make sure that the Latch Knob (46) is locked into hole 2.
  • Page 9 8. Remove the band securing the Upright Wire Harness (73) to the right Upright (85). Have a second person hold the console assembly near the right Upright. Console Assembly Connect the Upright Wire Harness (73) to the wires extending from the console assembly. Make sure to connect the connectors prop- erly (see the inset drawing).
  • Page 10 11. With the help of a second person, carefully lower the Uprights (85) to a vertical position. Attach the Right Base Cover (86) with three 3/4” Screws (7) and two Base Cover Screws (63). Start all five Base Cover Screws before tight- ening them.

  • Page 11: Operation And Adjustment

    Grounded Outlet Box the right). To purchase a surge suppressor, see Adapter your local NordicTrack dealer or call the toll-free Surge Suppressor telephone number on the front cover of this man- ual and order part number 146148, or see your local electronics store.
  • Page 12 CONSOLE DIAGRAM FEATURES OF THE CONSOLE with the 8-week Weight Loss program, or train for a long-distance run with the Marathon program. iFIT pro- The treadmill console offers an impressive array of grams automatically control the treadmill while the features designed to make your workouts more effec- voice of a personal trainer coaches you and motivates tive and enjoyable.
  • Page 13 HOW TO TURN ON THE POWER Plug in the power cord (see page 11). Next, Reset locate the reset/off cir- Position cuit breaker on the When the User/Enter button is pressed, the words treadmill frame near “User 1 Selected” or “User 2 Selected” will appear the power cord.
  • Page 14 Select the settings mode. you through your workouts and instruct you how to purchase more iFIT Cards if “Instruction” is se- To select the settings mode, first remove the key lected as your audio setting. If you select the “On” from the console.
  • Page 15 Change the incline of the treadmill as desired. HOW TO USE THE MANUAL MODE To change the incline of the treadmill, press the Incline increase or decrease button, or one of the Insert the key into the console. twelve 1 Step Incline buttons. Each time one of the buttons is pressed, the incline will gradually See HOW TO TURN ON THE POWER on page adjust until it reaches the selected incline setting.
  • Page 16 When the manual mode is selected, the console To use the offers eight display modes. The display mode that handgrip you select will determine which workout informa- pulse sensor, tion is shown. For example, the first display mode first remove shows only the elapsed time and the distance that the sheets of you have walked or run.
  • Page 17 If the first or second display mode is selected, a HOW TO USE A CARDIO PROGRAM profile of the speed settings of the program will ap- pear in the display. A small arrow below the profile Insert the key into the console. will indicate your progress.
  • Page 18 If the speed or incline setting for the current seg- Turn on the fan if desired. ment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; See step 8 on page 16. however, when the next segment begins, the treadmill will automatically adjust to the speed When you are finished exercising, remove the...
  • Page 19 same target heart rate setting may be pro- HOW TO USE A PULSE PROGRAM grammed for two or more consecutive segments. Adjust the maximum target heart rate setting if CAUTION: desired. If you have heart prob- lems, or if you are over 60 years of age and To adjust the maximum target heart rate setting, have been inactive, do not use the Pulse pro- press the increase and decrease buttons beside...
  • Page 20 If the speed or incline setting for the current seg- ton. If Pulse program 2 is selected, the program ment is too high or too low, you can override the will continue until the small arrow reaches the setting by pressing the Speed or Incline buttons; right end of the profile.
  • Page 21 Press the Start button to start the program. HOW TO CREATE A RECORD PROGRAM A moment after the button is pressed, the walking Insert the key into the console. belt will begin to move. Hold the handrails and begin walking. See HOW TO TURN ON THE POWER on page Select a display mode and program the desired speed and incline settings.
  • Page 22 Select a display mode and monitor your HOW TO USE A RECORD PROGRAM progress with the display and the training zone bar. Insert the key into the console. The Record program will function in the same way See HOW TO TURN ON THE POWER on page as a Cardio program (see step 5 on pages 17 and 18).
  • Page 23 Press the Start button to start the program. HOW TO USE AN IFIT CARD A moment after the button is pressed, the tread- Insert the key into the console. mill will automatically adjust to the first speed and incline settings of the program. Hold the handrails See HOW TO TURN ON THE POWER on page and begin walking.
  • Page 24 HOW TO ADJUST THE CUSHIONING SYSTEM HOW TO USE THE STEREO SOUND SYSTEM The treadmill features a cushioning system that re- To play music or audio books through the console’s duces the impact as you walk or run on the treadmill. stereo speakers, you must connect your MP3 player or To increase the firmness of the walking platform, step CD player to the console.

  • Page 25: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

  • Page 26: To Lower The Treadmill For Use

    HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left.

  • Page 27: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 28 Locate the Reed Switch (22) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the View Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”.

  • Page 29: Conditioning Guidelines

    CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for en- WARNING: ergy. Only after the first few minutes does your body Before beginning this begin to use stored fat calories for energy. If your goal or any exercise program, consult your physi- is to burn fat, adjust the speed and incline of the tread- cian.

  • Page 30: Part List

    PART LIST—Model No. NTL09806.1 R0407A To locate the parts listed below, see the EXPLODED DRAWING starting on page 32. Key No. Qty. Description Key No. Qty. Description Left Foot Rail Plastic Tie Foot Rail Screw Front Roller Bushing Cushion Adjustor...

  • Page 31: Ordering Replacement Parts

    To order replacement parts, see the front cover of this manual. When ordering parts, please be prepared to give the following information: • the MODEL NUMBER OF THE PRODUCT (NTL09806.1) • the NAME OF THE PRODUCT (NordicTrack C2400 treadmill) • the SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual) •...

  • Page 32: Exploded Drawing

    EXPLODED DRAWING A—Model No. NTL09806.1 R0407A...
  • Page 33 EXPLODED DRAWING B—Model No. NTL09806.1 R0407A...
  • Page 34 EXPLODED DRAWING C—Model No. NTL09806.1 R0407A...
  • Page 35 EXPLODED DRAWING D—Model No. NTL09806.1 R0407A...

  • Page 36: Limited Warranty

    LIMITED WARRANTY WHAT IS COVERED—The entire NordicTrack C2400 treadmill (“Product”) is warranted to be free of all defects in mate- rial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.

This manual is also suitable for:

C2400

Table of Contents