NordicTrack club cr NTL49008.0 User Manual page 8

1. Make sure that
the Power Cord
(70) is unplugged.
Be careful not to
pinch the Power
Cord.
Slide the Upright Cover (not shown) off the
Upright (81).
Orient the Upright (81) and the plastic ties as
shown. Set the Upright on the tabs on the
Frame (53). Attach the Upright to the Frame with
four 3/8" x 3 1/4" Patch Bolts (1) and four 3/8"
Star Washers (2). Start all four Patch Bolts
before tightening any of them. Be careful not
to pinch any wires.
2. Insert the end of the Upright Wire (111), the 60"
TV Cable (128), and the 60" AV Wire (129)
through the looped plastic ties at the top of the
Upright (81). Make sure that the wires are be-
hind the crossbars on the Upright. Then, gen-
tly pull upward on the wires as you tighten the
plastic ties around the wires.
1
!
2
8
Plastic Ties
81
1
2
1
2
70
111
Plastic Ties
81
Crossbar
Crossbar
53
Tab
129
128
Crossbar