NordicTrack club cr NTL49008.0 User Manual page 10

5. Have a second person hold the Console (101)
near the handrail assembly.
Connect the Upright Wire (111) and the handrail
wires to the console wires. Make sure that the
console wire and the handrail wire that you are
connecting have connectors that are the same
size. See the lower drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and
then try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
Connect the 60" TV Cable (128) and the 60" AV
Wire (129) to the AV wires extending from the
Console (101).
Insert the excess wires down into the Upright
Cover (80).
Set the Console (101) on the handrail assembly.
Be careful not to pinch any wires.
6. Align the holes in the Console (101) with the
holes in the handrail assembly and the holes in
the Upright (not shown). Attach the Console and
the handrail assembly to the Upright with two
3/8" x 3 1/4" Patch Bolts (1) and two 3/8" Star
Washers (2). Do not fully tighten the Patch
Bolts yet. Note: It may be helpful to press the
indicated bracket against the Upright and to
press down on the Console to align the
holes.
5
Console
Wires
Handrail
Wires
111
Console
Wire
6
101
1
2
Bracket
10
101
AV
Wires
129
128
Handrail
Wire
Handrail
Assembly
80
111
Handrail
Assembly