Lldp Admin-Status - H3C S5120-SI Series Command Reference Manual

Inventory TLV
Table 43 Output description
Field
LLDP tlv-config of port 1
NAME
STATUS
DEFAULT
Basic optional TLV
IEEE 802.1 extended TLV
IEEE 802.3 extended TLV
LLDP-MED extend TLV

lldp admin-status

Syntax
lldp admin-status { disable | rx | tx | txrx }
undo lldp admin-status
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
YES YES
Description
Advertisable optional TLVs of port 1.
TLV type.
Indicates whether TLVs of a specific type are currently sent through a
port.
Indicates whether TLVs of a specific type are sent through a port by
default.
Basic TLVs:
•
Port description TLV
•
System name TLV
•
System description TLV
•
System capabilities TLV
•
Management address TLV
IEEE 802.1 organizationally specific TLVs:
•
Port VLAN ID TLV
•
Port and protocol VLAN ID TLV
•
VLAN name TLV
IEEE 802.3 organizationally specific TLVs:
•
MAC-Physic TLV
•
Power via MDI TLV
•
Link aggregation TLV
•
Maximum frame size TLV
LLDP-MED TLVs, including:
•
Capabilities TLV.
•
Network Policy TLV.
•
Extended Power-via-MDI TLV.
•
Location Identification TLV.
•
Inventory TLV, including hardware revision TLV, firmware revision TLV,
software revision TLV, serial number TLV, manufacturer name TLV,
model name TLV, and asset id TLV.
184