5. Userware
System page
•
To see the System page, click on System.
OSD
•
Click on OSD to turn the on-screen display On
Backlight
•
Click on Backlight to turn the control panel backlight On
DMD controls
•
Click on the DMD buttons to turn each DMD On or Off.
Lamp mode
•
Click on Lamp mode to select one of the following from the drop down menu:
Dual
Alternate
Lamp 1
Lamp 2
Lamp Power slider
•
Use the slider to adjust the lamp power from 80% to 100%.
Page 5.22
Downloaded From projector-manual.com Digital Projection Manuals
Digital Projection
or Off
.
or Off
.
User Manuall
TITAN sx+600/700.
Notes
For projectors with only one
lamp, only Lamp 1 will be
available.
For more information about
lamp mode, see Setup menu,
in section 4. Controlling the
projector.
Rev C August 2009