Table of Contents
Advertisement
Digital Projection
Geometry menu continued
When Input Detection is set to Custom:
•
Press
and
Press
and
video signal.
Blanking
Blanking curtains can be applied to each edge of the picture.
•
Press
and
Press
to open the Blanking submenu.
Blanking On/Off
•
Press
and
On
Off
Blanking adjust
•
Press
and
Press
and
Rev C August 2009
Downloaded From projector-manual.com Digital Projection Manuals
User Manual
TITAN sx+600/700.
to select one of the adjustment sliders.
to adjust the slider to match the resolution of the incoming
to select Blanking.
to select from:
to select the edge to be Blanked.
to adjust the slider (0 to 200).
4. Controlling the projector
Notes
The adjustment sliders are
available only if Input Detection
is set to Custom.
Total H Samples is available
for RGB1 and RGB2 inputs
only.
V Offset is available for DVI
input only.
Geometry Menu
Blanking
The blanking curtains will not
applied until Blanking is turned
On.
The On Screen Display will
move to the centre of the DMD
when Blanking is turned On.
Set to zero for no blanking, eg
the top edge in this example.
Page 4.27
Advertisement
Table of Contents
