Coleman 800ATV-2 Owner's Manual page 39

4-12 Control Functions
UNLOCK
When "2WD" is selected, the engine only
provides power to the rear wheels.
WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from 4WD to
4WD LOCK, while the ATV is moving.
WHAT CAN HAPPEN
It may cause the ATV to become hard to
handle. The operator could lose control.
HOW TO AVOID THE HAZARD
Always completely stop the ATV before
changing from 2WD to 4WD or from 4WD to
4WD-LOCK.
2WD/4WD selection
1. Selection lever switch
2. 2WD/4WD" selector button
From 2WD to 4WD:
You must stop the ATV first, then you can

select "2WD" or " 4WD" .by pushing the
gray button to the 'in' or 'out' position.
 When and the gray button is pushed in,
4WD is selected, the ATV changes to the
4-wheel drive system.