8-14
Periodic Maintenance and Adjustment
1.
Differential gear oil 2. Differential gear oil filler bolt
3.
Correct oil level
CAUTION:
Be sure no foreign material enters the final
gear case.
3. Install the differential gear oil filler bolt, and
then tighten it to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
17 ft·lbf (2.3m·kgf, 23 Nm)
Replacing the differential gear oil
1. Place the ATV on a level surface.
2. Place a container under the differential
gear case to collect the used oil.
3. Remove the differential gear oil filler bolt
and drain bolt to drain the oil.
1. Differential gear oil drain bolt
4. Install the differential gear oil drain bolt
and tighten it to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
7.39 ft·lbf (1.0m·kgf, 10 Nm)