Coolant Replacement - Coleman 800ATV-2 Owner's Manual

8-16 Periodic Maintenance and Adjustment
3. If the coolant is at or below the minimum
level mark, remove the reservoir cap. Add
coolant to the maximum level mark, replace
the reservoir cap, and install the side panel.
Coolant reservoir capacity
(up to the maximum level mark):
0.31 US qt (0.26 lmp qt, 0.3 L)
CAUTION:
Hard water or salt water is harmful to the
engine. You may use soft water if you cannot
get distilled water.
CAUTION:
If soft water is added, have a dealer check
the antifreeze content of the coolant as soon
as possible.
The radiator fan operation is completely
automatic. It is switched on or off based on
the coolant temperature in the radiator.
If your ATV overheats, see P4-4 for details.

Coolant replacement

WARNING
Removing the radiator cap when the engine
and radiator are still hot, you could be burned
by hot fluid and steam blown out under
pressure.
1. Place the ATV on a level surface.
1. Coolant drain bolt