Table of Contents
Advertisement
EQN2200/2201
Save/Load Configuration Server
To take a backup of all of the settings in the current configuration, press Save to
save the configurat
ion to a config. file. Once saved, it is then possible to return to
the previous setting
s if/when desired.
To return to a previously saved configuration, press the Browse button to locate
and select the saved config. file (see above) and then click the Load button. The
settings will be restored to the previous configuration.
Upgrade Firmware
Upgrade the EQN2200/2201 with the latest firmware.
Press the Browse button to locate the firmware file. Press the Upgrade button to
upgrade the firmware.
Note 1: Do not disconnect power to the unit during the upgrade. The unit reboots
automatically after the upgrade has completed. (1-5 minutes.)
2. During upgrade process, all event recording actions will be stopped.
They will resume after the camera is rebooted.
39
Advertisement
Table of Contents
