EverFocus eqn2200 User Manual page 16

IP Settings
• IP Type
• IP address
• Subnet mask
• Gateway (when using the gateway server/router)
• Primary DNS, Secondary DNS (when using DNS)
IP Type
DHCP: Configure the DHCP server not to assign the same IP addresses used for
th e other network cameras and PCs whose IP address is unique.
Refer to the network administrator for the settings of the server.
Default: DHCP.
tatic IP: User can manually set the static IP for netw
S
PPPoE: This is for a DSL DIRECT connection application; the ISP
us er name and password. (That is, if a single camera is connected directly to the
DSL modem.)
Note: If PPPoE is used as IP type, IP Utility software will not be able to detect the
device.
IP address
When not using DHCP, enter the IP address of the camera. Avoid address conflicts;
do not enter an IP address already used for a PC or other network cameras. Every
device on an IP network must have a unique IP address.
Subnet Mask
This field is to set the netmask for your network so as the IP camera will be
recognized within the network. Example: 255.255.255.000 typical for a Class "C"
network. When DHCP is selected, the DHCP server will assign this value
automatically.
G ateway
This field is to set the gateway for your network so the IP camera will be
recognized within the network. When DHCP is selected, the DHCP server will
assign th is value automatically.
ork connection.
16
EQN2200/2201
will require a