Table of Contents
Advertisement
Model 2160 Series Getting Started Guide
-----------------------------------------------------------------------------
Command: setup vlan link_mode <1~6> <Access|Trunk>
Message: Please input the following information.
Port index <1~6>: 1
Port link type (TAB Select) <Access>:
-----------------------------------------------------------------------------
Table 22
shows the options available within the 802.1Q Tag VLAN command menu:
Access
Trunk
No.
VID
1
2
3
4
5
6
7
8
PVID
Link Type
Port-Based VLAN. With port-based VLAN, the port is assigned to a specific VLAN independent of the user
or system attached to the port. This means all users attached to the port should be members in the same
VLAN. The network administrator typically performs the VLAN assignment. The port configuration is static
and cannot be automatically changed to another VLAN without manual reconfiguration.
You can set up Port-Based VLAN using the method for 802.11Q. However, VID , PVID or link type do not
matter for Port-Based VLAN. Use the list command to check the status of the VLAN.
-----------------------------------------------------------------------------
Virtual LAN Parameter
VLAN Mode
Virtual LAN Table
No LAN1 LAN2 LAN3 LAN4 Line Sniffing
--
---- ---- ----
1
1
1
1
2
-
-
-
3
-
-
-
4
-
-
-
5
-
-
-
6
-
-
-
7
-
-
-
8
-
-
-
-----------------------------------------------------------------------------
Setup Command Menu
The port can receive or send untagged packets.
The port can receive or send tagged packets.
Table 22. 802.1Q VLAN Options
1
2
LAN1
LAN2
Access
Access
Trunk
Trunk
: Port-Based VLAN
---- ---- --------
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
5 • Console and Telnet configuration
3
4
LAN3
LAN4
Access
Access
Trunk
Trunk
5
6
Line
Sniffing
Access
Access
Trunk
Trunk
78
Advertisement
Table of Contents
