Table of Contents
Advertisement
Model 2160 Series Getting Started Guide
-----------------------------------------------------------------------------
Command: ... 2 edit <Disable|Enable> <string> <Read_Only|Read_Write|Denied>
Message: Please input the following information.
Validate (TAB Select) <Enable>: Enable
Community (ENTER for default) <private>:
Access right (TAB Select) <Denied>:
-----------------------------------------------------------------------------
You can set up the following options:
•
Validate: Set to Enable or Disable.
•
Community: Enter the desired password for community access.
•
Access right: Set to Read only, Read Write or Denied.
Read_Only
Read_Write
Denied
Use the list command to view all SNMP community pool entries. You can also confgiure five SNMP trap
entries.
Trap host
To set up SNMP traps, move the cursor " >>" to trap in the snmp menu and press Enter. You can configure
five trap entries.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The following menu displays:
edit
Edit trap host parameter
>>
list
Show trap configuration
Select edit and press Enter.
-----------------------------------------------------------------------------
Command: admin snmp trap 1 edit <Disable|1|2> <ip> <string>
Message: Please input the following information.
Version (TAB Select) <Disable>:
Trap host IP address (ENTER for default) <192.168.0.254>:
Community (ENTER for default) <private>:
-----------------------------------------------------------------------------
Administration Command Menu
Users have read-only access to the community
Users have read and write access to the community
There is no access to the community
5 • Console and Telnet configuration
93
Advertisement
Table of Contents
