Dhcp Server; Dhcp Fixed Host - Patton electronics CopperLink 07M2160-GS Getting Started Manual

Model 2160 Series Getting Started Guide

DHCP Server

The dhcp command menu lists commands for configuring DHCP settings. Move the cursor " >>" to dhcp in
the setup menu and press Enter. The following menu displays:
generic DHCP server generic parameters
>>
fixed DHCP server fixed host IP list
list Show DHCP configuration
The generic command menu lists commands for configuring general DHCP settings. Move the cursor " >>" to
generic in the dhcp menu and press Enter. The following menu displays:
active Trigger DHCP server function
>>
gateway Default gateway for DHCP client
netmask Subnet mask for DHCP client
ip_range Dynamic assigned IP address range
lease_time Configure max lease time
name_server1 Domain name server1
name_server2 Domain name server2
name_server3 Domain name server3

DHCP Fixed Host

The dhcp command menu lists commands for configuring DHCP settings. Move the cursor " >>" to dhcp in
the setup menu and press Enter. The following menu displays:
generic DHCP server generic parameters
>> fixed DHCP server fixed host IP list
list Show DHCP configuration
The fixed command menu lists commands for configuring a Fixed Host IP Address list. Move the cursor " >>"
to fixed in the dhcp menu and press Enter. The following menu displays:
add Add a fixed host entry
>>
delete Delete a fixed host entry
When using the fixed host entry function, you must enter the MAC address and IP address at the same time.
You can configure up to 10 maximum fixed host IP addresses.
Use the list command to view the DHCP configuration.
Setup Command Menu
5 • Console and Telnet configuration
85