Registering The Handset - Swisscom Aton CL315 User Manual

First steps

Registering the handset

A handset can be registered on up to four bases. You must initiate handset reg-
istration on the handset and on the base.
When the registration process has completed successfully, the handset
returns to idle status. The handset's internal number is shown in the display,
e.g.,
INT
On the handset
Please note
If the handset is already registered to at least one base, start the registra-
tion process as follows:
¢
v
If the handset is already registered to four bases, select the required base.
On the base
Within 60 sec. press and hold the registration/paging key on the base
(approx. 3 sec.).
Please note
For instructions on deregistering the handsets, please consult the base user
guide.
12
1. If not, repeat the procedure.
Register
¢ ¢
Ï
Registration
¤
Press the key below
the display screen.
A message appears stating that the
handset is searching for a base that
is ready for registration.
Register Handset
on
§Register§