Swisscom Aton CL315 User Manual page 14

Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully
charged and discharged.
Please note
u
After the first battery charge and discharge, you may place your handset
in the charger after every call.
u
Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u
The batteries may warm up during charging. This is not dangerous.
u
After a while, the charge capacity of the batteries will decrease for tech-
nical reasons.
¤
Charge the handset for 8.5 hours in the
charger.
¤
8.5 hrs
First steps
Then remove the handset
from the charger and do
not replace it until the bat-
teries are fully discharged.
13