Setting Up The Charger; Connecting The Charger - Swisscom Aton CL315 User Manual

Setting up the charger

The charger is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤
Place the charger on a level, non-slip surface or mount it on the wall
¢
( page 55).
Please note
Pay attention to the range of the base.
This is up to 250 m in unobstructed outdoor areas and up to 40 m inside
buildings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings,
the occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight
or other electrical devices.
u
Protect your telephone from moisture, dust, corrosive liquids and fumes.

Connecting the charger

2
To disconnect the plug from the charger,
press the release button
the plug 2.
¤
Connect the flat plug from the power
adapter 1.
1
¤
Plug the power adapter into the plug
socket 2.
and disconnect
1
First steps
¢
page 36) is activated.
2
1
9