Installation And Basic Configuration; Components; System Requirements; Installation Of Motoadmin - YASKAWA motoman dx100 Instruction Manual

10

2 Installation and basic configuration

2.1 Components

MotoAdmin package contains:
►
1 CD-ROM
►
1 Hardware key
►
1 RS232 cable; robot controller (9pin) <-> pc (9pin)
►
1 user manual

2.2 System requirements

►
W dows PC in
•
WindowsXP/2000/7
•
Ethernet TCP/IP network interface or seri
•
20 MByte free
•
CDROM drive
►
Robot controller XRC, NX100 or DX100

2.3 Installation of MotoAdmin

Installation of hardware key should be done after s
b e some problems in case of USB hardware keys.
Before starting software installation procedure, login to windows system with local adminis-
tr ative rights.
Insert CDROM into CDROM drive of computer. The installation now starts automatically.
not use windows explorer, change to CDROM drive letter and run „cdstarter.exe" d
fr om CDROM. After splash screen is displayed select installation of MotoAdmin.
If corresponding message appears restart your computer.
Execution of MotoAdmin is only possible, if the hardware key is attached to the parallel port
(optional USB port) of your
and not a 25pin serial one.

2.4 Uninstallation of MotoAdmin

To unin stall MotoAdmin software open windows control panel and select Add/Remove pro-
g rams.
22.08.2011
harddisk storage capacity
computer. Please confirm selected interface is a parallel interface
Installation and basic configuration
al COM interface
oftware installation. Otherwise there may
If
irectly
Yaskawa Europe GmbH
23/55