Table of Contents
Advertisement
2.4.3 FTP
FTP server is used to upload camera snapshot captured by motion
detection to your assigned FTP address. Test after all FTP parameters filled in.
2.5 Event
2.5.1 Motion Detect
To activate motion detection:
1) Click on "Enable"
2) Select red grids by clicking or dragging you mouse
3) Sensor can only be triggered by movements within the red marked areas
4) Adjust the sensibility: Very High / High / Normal / Low
2.6 System
2.6.1 User
In this page, you can create up to 7 guest accounts. With the guest
account, the user can use all functions in the home page of the
camera, and check camera's device info. However guest account
has no authority to access parameters setting page or change other
system settings.
Note:
・ The user account is required when you sign in the camera from the
webpage via IPCSearch
・ The P2P password is required when you try to view the camera
via P2P software such as IPCamClien from Windows PC or
MyCam Pro from phone.
・ The username for administrator is fixed as admin.
13/14
Hide quick links:
Advertisement
Table of Contents
