Sharp PC-1403 Operation Manual page 40

34
• In the Hex mode, the function keys on the computer are not usabl e .
• When the computer is in the STAT or MATRIX mode (a dash(-) i n dicator i s shown
at the STAT or MATRIX label), neither conversion between decimal and hex
numbers nor a hex calculation is executable.
AB. HEX
Example: A B
[±El ~
FFFFFFFF55. HEX
Example: B
GJ
3
[KJ ...
Error (Symbol "E" is displayed.)
If a fractional part is in the result of the final calculation, it will be truncated and only
the integer part of the result will be displayed.
Example: B
CB
3 ~ ... 3. HEX
• In the Hex mode, the
[±a
key may be used to obtain a complement for the hex
number now shown in the display.
For hex calculations, you should note the following points:
• In hex calculations, the computer ignores all fractional parts. This means that the
decimal point key,
GJ ,
is meaningless even if pressed for a hex calculation.
• If an intermediate result in successive hex calculations includes a fractional part, an
error will result.
Answer:
Answer:
A3882FBIM±J
Answer:
6F.
HEXI
730.
HEXI
7AC.
HEXI
Total
Keyin: ~ ~
43AG 3CB
1M±J
43A - 3CB
=
+)A38 - 2FB
=
Example:
Using as a Calculator