Sharp PC-1403 Operation Manual page 224

218
PC-1403 does not contain the following commands. Any program containing these
must be modified.
CLS, CURSOR, MEM$, GCURSOR, GPRINT, LINE, POINT, PRESET, PSET,
(TEST)
Mod ifi cations Required f o~r_PC-1350 and PC-2500 Series
IRB!t
111!!i§.IMl#ll'•'"*•''"i•fiit.-
Programs written on PC-1401, PC-1450 and PC-1460 Series computers can be used
without modification on the PC-1403.
( 1) Character Code modification
Character code 96 (&60) is a space in PC-1260 Series but is a left single quote
(') in PC-1403. Accordingly, when the CHA$ command is used to specify a
space with character code 96, change this code to character code 32 (&20).
(2) CLS, CURSOR commands
PC-1403 does not have the CLS or CURSOR display commands. Deletion and
modification of these commands in any programs containing these are required.
Modificat ions Required for PC· 1260 Series
APPENDIXG
Using Programs Written on Other PC Models