Download Print this page

Marstair DXD(H) 50 Installation Instruction page 2

566 series fan coil units

Advertisement

1.
TEV Ltd recommend that personnel working on this equipment be skilled and fully conversant with
the appropriate Air Conditioning, Refrigeration and Electrical practices and have sound knowledge
of current Industrial Safe Working practices.
2.
These units are supplied with a holding charge of oxygen free nitrogen and polyolester oil.
Do not open the valves until the system is fully installed.
Do not mix oils and refrigerants.
3.
These units contain live electrical components, moving parts and refrigerant under pressure.
Always site out of reach of children and protect from vandalism.
4.
The data plate only gives information for the indoor unit. For system details add input power and
current of indoor and outdoor unit, including any heater load.
5.
FUSES- for recommended fuse size see indoor unit instructions.
Tel: 01823 665660
Heronhill - for all your Marstairs requirements
GENERAL
www.heronhill.co.uk
56608008-03
Fax: 01823 665807

Advertisement

loading

This manual is also suitable for:

Dxd(h) 60Dxd(h) 90Dxd(h) 130Dxd(h) 150