DJ68-00085P
1/16/02 11:52 AM
REPLACING THE DUST BAG
1. To open the dust cover of the dust
bag compartment, press the
clamper upward.
(The clamper is located at the front
of the dust cover)
3. After removing the used dust bag,
insert the cardboard bag collar of the
new dust bag into the carrying bag,
and then insert it in its original position
NOTE: Used dust bag can be sealed
by removing the film from the
paper and sticking the latter
over the suction opening.
Page 6
2. Remove the carrying bag from the
cleaner.
4. Press the dust cover down gently
until the clamper relocks.
5