Related Manuals for Nilfisk-Advance GM 100 Sprint Plus
Summary of Contents for Nilfisk-Advance GM 100 Sprint Plus
- Page 1 DJ68-00085P 1/16/02 11:52 AM Page 1 GM 100 Sprint Plus GM 100 Sprint Plus Pet Pack INSTRUCTIONS FOR USE...
-
Page 2: Important Warnings
DJ68-00085P 1/16/02 11:52 AM Page 2 IMPORTANT WARNINGS 1. This machine must be connected to the same mains voltage as shown on the rating plate. 2. This machine is not suitable for picking up health endangering dust. 3. This machine is for dry use only and shall not be used or stored outdoors in wet conditions. -
Page 3: Identifications Of Parts
DJ68-00085P 1/16/02 11:52 AM Page 3 IDENTIFICATIONS OF PARTS HANDLE SUCTION HOSE AIR REGULATOR TOOL STORAGE COVER DUST-FULL INDICATOR TUBE CORD REWIND BUTTON SMART PROTECTOR POWER CONTROL SWITCH BUTTON FOR SUC- ON/OFF BUTTON TION HOSE REMOVAL CARRYING HANDLE CLAMPER FOR DUST BAG COMPARTMENT FLOOR NOZZLE RUG/FLOOR SELECTOR... -
Page 4: On/Off Switch
DJ68-00085P 1/16/02 11:52 AM Page 4 POWER CORD 1. PULLING OUT The power cord is long enough to be drawn out for convenience. 2. REWINDING When you have finished cleaning, disconnect the plug from the electri- cal outlet and simply press the cord rewind button lightly with your toe. - Page 5 DJ68-00085P 1/16/02 11:52 AM Page 5 DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. NOTE: If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
-
Page 6: Replacing The Dustbag
DJ68-00085P 1/16/02 11:52 AM Page 6 REPLACING THE DUST BAG 1. To open the dust cover of the dust 2. Remove the carrying bag from the bag compartment, press the cleaner. clamper upward. (The clamper is located at the front of the dust cover) 3. - Page 7 DJ68-00085P 1/16/02 11:52 AM Page 7 MAINTENANCE OR REPLACEMENT OF THE FILTERS 1. INLET-FILTER. • Open the dust cover. • After detaching the filter, wash it lightly with water, dry it in the shade, and then insert it in its original position. •...
-
Page 8: Troubleshooting
DJ68-00085P 1/16/02 11:52 AM Page 8 CARING THE Pet Brush turbine (GM 100 Sprint Plus Pet Pack model only) Open the cover. Push up the After cleaning the turbine, reposition it into its’ own both sides of cover. Lift it place.