Pride Mobility 613 Owner's Manual page 20

I I I . B A T T E R I E S A N D C H A R G I N G
Follow these easy steps to charge the batteries:
1
4
Figure 12. Battery Charging Procedures Diagram
WARNING! The LED lights on the charger indicate different charger conditions at various
times. If the LED does not indicate that charging is complete within 24 hours, unplug the
charger from the outlet and contact your Provider. Refer to the operating instructions
supplied with the charger for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery
condition meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your scooter's battery voltage is low, the charger works harder, sending more electrical current to
the batteries to bring up their charge. As the batteries approach a full charge, the charger sends less and
less electrical current. When the batteries are fully charged, the current sent from the charger is at nearly
zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your scooter's
batteries, but does not overcharge them. Refer to the manual supplied with the battery charger for charging
instructions.
Can I use a different charger?
Chargers are selected precisely for particular applications and are especially matched to the type, size and
chemical formulation of specific batteries. For the safest and most efficient charging of your scooter's
batteries we recommend only use of the charger supplied as original equipment with your product. Any
charging method resulting in batteries being charged individually is especially prohibited.
What if my scooter's batteries won't charge?
 Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.
 Ensure both ends of the charger power cord are inserted fully.
20
2
5
8-14H
3
6
Full-size Scooter Series