Pride Mobility 613 Owner's Manual page 18

NOTICE: If you are preparing the scooter for
transport or service, or if there is a situation that
requires you to manually shut down the electrical
system, press the manual shut-off button on the
circuit breaker. This will cut all power to the scooter.
SECUREMENT POINTS
Always secure the scooter in a forward-facing position
in the vehicle. Attach the four tie-down straps to the
designated securement points. See figures 9 and 10.
Tighten the straps to sufficiently remove all slack.
Never attach tie-downs to adjustable, moving, or
removable parts of the scooter such as armrests,
shrouds, and wheels. These items should be removed.
Position the anchor points for the rear tie-down straps
directly behind the rear securement points on the
scooter. The front tie-down straps should anchor to
floor points that are spaced wider than the scooter to
provide increased lateral stability.
WARNING!
properly secured to the motor vehicle
during transport. Scooters that are not
properly secured can become a hazard
to the user and to other vehicle
passengers in the event of a crash,
sudden stopping, or swerving, as the
scooter could tip or slide out of place.
1
Figure 10. Front Securement Points (Identified with black dots)
18
I I . Y O U R S C O O T E R
Ensure scooters are
IDENTIFICATION KEY
1. 3-WHEEL MODELS
2. 4-WHEEL MODELS
2
IDENTIFICATION KEY
1. MODELS 613 AND 713
2. MODELS 614 AND 714
1
2
Figure 9. Rear Securement Points (Identified with
black dots)
2
Full-size Scooter Series