Cool Mode Operation Procedure - Gree KFR-25 Owner's Manual

COOL mode operation procedure

According to the differences between room temp.and set temp.and the rate dropp-
ing of room temp.,microcomputer can control output power of the compressor,that
is,the cooling capacity.
If fan speed is set at AUTO mode microcomputer can control fan speed of the ind-
oor fan motor according to the output power of the compressor.
Set temp.should be in range of 16
5.Press TEMP button,set
suitable SET TEMP.
2.Press MODE button,set
operation mode.
3.Press SWING button,the
louvers start to rotate
automatically and stop
when repressed.
7
to 30 .
4.Press FAN button,set fan
speed.
1.Plug in,press ON/OFF
button,and then air condi-
tioner is turned on.