ProMinent DULCOMETER D1C Type D Operating Instructions Manual page 23

Complete Operating Menu / Description
Servomotor
The operating range is given by the overall resistance range of the feedback potentiometer. Defining the
control range places a maximum limit on the control range used.
IMPORTANT
• The servomotor must be actuated with the same care as for the calibration of a measuring
sensor.
• To ensure correct function, the control duration of the servomotor must be at least
25 seconds for 0...100 % of the control range.
Access to all setting menus can be blocked with an access code !
only with servomotor
servomotor
setting ?
Servomotor
Control direction
Control range
NOTE
• When the wide bar is as far right as it will go, the servomotor is fully open.
• The permanent display shows to what degree the motor has opened in % (the greater the
percentage, the farther open the servomotor).
servomotor
setting
current position:
servomotor
OK
current position:
Possible values
Initial value Increment
Setting Setting
ok
off
Cond. Cond.
Cond.
100 % 1 %
servomotor
open
servomotor
close ?
dosing cond
control range:
0 % to 100 %
operating range
Lower value Upper value
10 % 100 %
servomotor
open
please wait !
servomotor
opened !
Value take over ?
servomotor
closed
please wait !
servomotor
closed !
value take over ?
= automatic timing
D1C2-cond.-025-GB
Remarks
in % of
operating range
23